Mod index
An alphabetical list of all mods in the Compendium.
Aftermarket stickbox springs
Swap out the stock stickbox springs with alternatives to change the feel of the resistance.
Aftermarket trigger springs
Replace the springs to change the resistance profile of a trigger.
Aviator cable
Add an Aviator or Lemo connector to enable detaching the cable without opening the controller.
Bald buttons
Remove the letters and round the corners of OEM buttons to give them a smoother profile.
Button dyeing
Dye OEM buttons different colors.
Button remapping
Swap button inputs to enable Z jump or trigger jump in Melee.
Button stabilization
Use PTFE tape to reduce the amount of play between each button and the shell.
Detachable cable
Make it easier to swap cables without soldering.
Digital triggers
Use a trigger's digital press to input an analog value.
Ergo triggers
Replacement trigger button with a smoother shape for a more ergonomic feel.
Heartbeat module
Resolve both snapback and PODE with a combination of capacitors and resistors.
Liquid Cable
Create GCC cables from scratch.
Mechanical triggers
Replace the trigger assembly with a keyboard switch.
Mouse-click buttons
Replace the OEM silicone button membranes with mouse-click switches for a clickier feel.
Notches
Subtly changing the shape of the gate to add notches in specific places makes hitting certain analog values easier.
Pad perforation
Perforate the silicone button pads to decrease the force needed to actuate the buttons.
Paracords
Replace a cable's rubber insulation with nylon paracord for a custom look and feel.
Resin casting
Cast custom GCC buttons, sticks and triggers in resin with different colors and designs.
Retrobright
Use hydrogen peroxide to remove yellowing from clear or white shells.
Shell dyeing
Dye a shell to give it a different hue.
Shell painting
Painting a shell is the most popular way to get a fully custom shell design.
Shell tinting
Spray paint the inside of a clear shell to give it a splash of color.
Snapback module
Install capacitors to prevent analog misinputs due to snapback.
Stickbox lubing
Apply specialized grease to the inside of a stickbox to improve the smoothness of the movement.
Tactile Z
Replace the stock Z button switch with an aftermarket option for more tactility.
Trigger lubing
Apply a lubricant to the trigger assembly to make the trigger movement smoother.
Trigger plugs
Extend the shaft of a trigger to reduce the travel distance before actuating the digital press.
Trigger spring trimming
Shorten the spring to reduce the amount of force needed to press a trigger.
Trigger stabilization
Use PTFE tape to reduce the amount of play between each trigger and the shell.